 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SEMICONDUCTOR SYNERGY 6-BIT 2:1 MUX-REGISTER SY10E167 SY100E167 SY10E167 SY100E167 FEATURES s s s s s s s s s s s 1000MHz min. operating frequency Extended 100E VEE range of -4.2V to -5.5V 800ps max. clock to output Single-ended outputs Asynchronous Master Reset Dual clocks Fully compatible with industry standard 10KH, 100K ECL levels Internal 75K input pulldown resistors ESD protection of 2000V Fully compatible with Motorola MC10E/100E167 Available in 28-pin PLCC package DESCRIPTION The SY10/100E167 offer six 2:1 multiplexers followed by D flip-flops with single-ended outputs, designed for use in new, high-performance ECL systems. The Select (SEL) control allows one of the two data inputs to the multiplexer to pass through. The two external clock signals (CLK1, CLK2) are gated through a logical OR operation before use as control for the six flip-flops. The selected data are transferred to the flip-flops on the rising edge of CLK1 or CLK2 (or both). The multiplexer operation is controlled by the Select (SEL) signal which selects one of the two bits of input data at each mux to be passed through. When a logic HIGH is applied to the Master Reset (MR) signal, it operates asychronously to take all outputs Q to a logic LOW. BLOCK DIAGRAM D0a MUX D0b D1a MUX D1b D2a MUX D2b D3a MUX D3b D4a MUX D4b D5a MUX D5b SEL CLK1 CLK2 MR SEL SEL D R SEL D R Q Q5 SEL D R Q Q4 SEL D R Q Q3 SEL D R Q Q2 D R Q Q0 PIN CONFIGURATION D3b D3a NC VCCO D5a D5b CLK1 CLK2 VEE MR SEL D0a 25 24 23 22 21 20 19 D4b D4a Q Q1 26 27 28 1 2 3 4 5 6 7 8 9 10 11 18 17 Q5 Q4 VCC Q3 Q2 VCCO Q1 TOP VIEW PLCC J28-1 16 15 14 13 12 D0b D1a D1b PIN NAMES Pin D0a-D5a D0b-D5b SEL CLK1, CLK2 MR Q0-Q5 VCCO Function Input Data a Input Data b Select Input Clock Inputs Master Reset Data Outputs VCC to Output Rev.: C Amendment: /1 (c) 1999 Micrel-Synergy 5-127 VCCO Q0 Issue Date: February, 1998 D2a D2b SEMICONDUCTOR SYNERGY SY10E167 SY100E167 TRUTH TABLE SEL H L Data a b DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol IIH IEE Parameter Input HIGH Current Power Supply Current 10E 100E -- -- 94 94 113 113 -- -- 94 94 113 113 -- -- 94 108 113 130 TA = +25C TA = +85C Max. 150 Unit A mA Condition -- -- Min. Typ. Max. Min. Typ. -- -- 150 -- -- Max. Min. Typ. 150 -- -- AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol fMAX tPLH tPHL tS Parameter Max. Toggle Frequency Propagation Delay to Output CLK MR Set-up Time D SEL Hold Time D SEL Reset Recovery Time Minimum Pulse Width CLK, MR Within-Device Skew Rise/Fall Time 20% to 80% TA = +25C TA = +85C Max. -- 800 850 ps 100 275 300 75 750 400 -- 300 -50 125 50 -125 550 -- 75 450 -- -- -- -- -- -- -- 800 100 275 300 75 750 400 -- 300 -50 125 50 -125 550 -- 75 450 -- -- -- -- -- -- -- 800 100 275 300 75 750 400 -- 300 -50 125 50 -125 550 -- 75 450 -- -- ps -- -- -- -- -- 800 ps ps ps ps -- -- 1 -- -- -- Unit MHz ps 450 450 650 650 800 850 450 450 650 650 800 850 450 450 650 650 Condition -- -- Min. Typ. Max. Min. Typ. 1000 1400 -- 1000 1400 Max. Min. Typ. -- 1000 1400 tH tRR tPW tskew tr tf NOTE: 1. Within-device skew is defined as identical transitions on similar paths through a device. PRODUCT ORDERING CODE Ordering Code SY10E167JC SY10E167JCTR SY100E167JC SY100E167JCTR Package Type J28-1 J28-1 J28-1 J28-1 Operating Range Commercial Commercial Commercial Commercial 5-128 SEMICONDUCTOR SYNERGY SY10E167 SY100E167 28 LEAD PLASTIC LEADED CHIP CARRIER (J28-1) 5-129 |
Price & Availability of SY100E167JC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |